There are several Z-Wave shade types that are directly compatible with Wink (no bridge required); cellular, pleated, roman, solar, roller, nature, layered and sheer shades.

The most common cause of t shade to stop working is an interruption in power. Check battery orientation, replace batteries as needed and check that power connections are tight. If you have other shades that are working substitute the power supply from a known working shade to confirm shade operation. NOTE: use only 8 AA Lithium batteries. Batteries must be installed per the orientation shown on the battery case base. Failure to do so may result in injury and will invalidate the warranty. Do not mix type, brand or old with new. Do not attempt to recharge.

Both the motorized shade and the remote(s) have be enrolled within the Wink Z-Wave network to have both Wink and the remote(s) control the shade. Please follow the; exclude, include and associate instructions in the owners manual provided with your order or refer to the downloads available in the Wink help section for this process.